| Product Series | eco|matem Circular Connectors | |
| Number of Contacts | 3+PE, 6+PE | |
| Rated Voltage | 3+PE: 400V (Standard), 600V (High Voltage)
6+PE: 250V (Standard), 600V (High Voltage) | |
| Rated Current | 3+PE: 16A (Standard), 14A (High Voltage)
6+PE: 10A (Solder), 13A (Crimp) (Standard), 10.5A (High Voltage) | Current carrying capacity depends on wire gauge and ambient temperature (see Derating Curves). |
| Rated Impulse Withstand Voltage | 6000V (3+PE), 4000V (6+PE) | Overvoltage Category III |
| Pollution Degree | 3 (Standard), 2 (High Voltage) | |
| Material Group | II | |
| Insulation Resistance | 108 | |
| Contact Resistance | 5 m | |
| Operating Temperature | -40C ... +100C (Standard)
-40C ... +125C (High Voltage) | |
| Mating Cycles | 500 | |
| Cable Diameter Range | 6 mm - 12.5 mm (Strain relief with clamping ring)
6 mm - 10 mm (Internal cable clamping + clamping ring) | |
| Termination Techniques | Screw, Solder, Crimp | |
| Wire Gauge / AWG | Crimp: 0.14 - 1.5 mm (AWG 26 - 16)
Screw: max. 0.75 mm (AWG 18)
Solder: 0.14 - 2.5 mm (AWG 26 - 14) | See detailed charts for AWG to mm conversion. |
| Flammability | VO UL 94 | |
| Locking System | Round thread | |
| Insertion/Withdrawal Force | 15 N (Standard)
35 N (High Voltage) | |
| Mechanical Operation | 500 mating cycles | |
| Dimensions (Male Cable Connectors) | Straight: Strain relief with clamping ring, or internal cable clamping.
Right angled: Strain relief with clamping ring. | Specific dimensions (A) vary by termination type (Screw: 13.5mm, Solder: 14.2mm, Crimp: 16.5mm). |
| Dimensions (Female Cable Connectors) | Straight: Strain relief with clamping ring, or internal cable clamping.
Right angled: Strain relief with clamping ring. | Specific dimensions (A) vary by termination type (Screw: 14.0mm, Solder: 12.0mm, Crimp: 16.5mm). |
| Dimensions (Receptacles) | Male and Female receptacles available with screw, solder, or crimp termination. | Mounting hole 22 without chamfer required for receptacles. |
| Crimp Contacts | Pin and Socket available for Standard and High Voltage versions. | Contact 1.6mm. Insulation varies by wire gauge. |
| Accessories | Protective covers, back shells, cable clamps. | Specific part numbers listed in the document. |
