| SCOPE | Production and inspection of Connector | This specification applies to the production and inspection of the company's general series strip connector (pin header) products. |
| USE CONDITION | Ambient Temperature Range | -25+85 |
| USE CONDITION | Applicable PC board thickness | 1.2mm~1.6mm |
| Appearance | Product surface | Should be free from defects, dirt, cracks, and mechanical damage. Contacts should be free from rust, and plating should not be oxidized or peeled. |
| Dimension | External dimensions | According to drawings. Interchangeable with same specification products. |
| Material - Terminal | Phosphor bronze | Thickness: 0.15mm (for Contact), 0.30mm (for Contact Pin), 0.25mm (for Solder tabs) |
| Material - Terminal Plating | Tin Plating | 3~4m |
| Material - Housing | Plastic | Nylon66 UL94V-0 (Color: White) for Housing, Nylon46 UL94V-0 (Color: Beige) for Opening Wafer and Tiepian Wafer, PBT UL94V-0 (Color: White) for Lips Wafer. |
| Electrical Performance - Rated Voltage | 250V AC/DC | |
| Electrical Performance - Rated Current | 3A AC/DC | |
| Electrical Performance - Contact Resistance | 0.02 (20 m) | |
| Electrical Performance - Insulation Resistance | 100M | |
| Electrical Performance - Dielectric Strength | 1000V AC/minute | |
| Mechanical Performance - Male contact Retention force | 10N per pin | |
| Mechanical Performance - Female contact Retention force | 10N per pin | |
| Mechanical Performance - Plug-in force | 3N per pin | |
| Mechanical Performance - Plug-out force | 0.5N per pin | |
| Endurance Characteristics - Soldering rest | Time: 2.50.5S, Temperature: 2305, Area of Soldering: 95% | |
| Endurance Characteristics - Resistance to soldering Heat | Time: 51S, Temperature: 2305, Appearance: No Damage | |
| Endurance Characteristics - Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact resistance: 20 m | |
| Endurance Characteristics - Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact resistance: 20 m | |
| Endurance Characteristics - Temperature Cycling | 5 cycles, Low temp: -253, High temp: 853, Appearance: No Damage, Contact resistance: 20 m | Test after keeping in Normal Condition for 30 min. |
| Endurance Characteristics - lnvariab lenes humidity | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h, Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100M | |
| Endurance Characteristics - Salt Spray | Salt concentration: 51%, Temperature: 352, Time: 162h, Appearance: No Damage, Contact resistance: 20 m | After salt is removed by running wafer and A drop is removed, it is measured. |
